ΠΡΟΕΚΤΑΣΗ ΓΙΑ ACTION CAMERA BORIKA FASTen Ng400

Product description:

• The Ng400 is an assembly that includes an Ng002 action camera holder and an Ex400 extender. It is suitable for installing most popular action cameras on various vessels: inflatable boat, fishing kayak, boat, RIB or belly boat (float tube). It allows you to mount the action camera at a distance of 30 cm from the installation point. 
• Can be used for streaming video on the move and will be helpful in capturing any bright moments of on-water activities. The extender length is optimal for shooting (streaming) without using telescopic struts and other additional supporting points.
• The design provides a 2-to-3 GoPro connector and a 1/4” screw thread for mounting different action cameras. Such a system is scalable, allowing you to add additional accessories. For example, adding an Ng004 holder with two more 2-to-3 GoPro connectors, you can get the opportunity to fix the lighting (a flashlight) or a second action camera. 
• The design allows for adjusting the optimal position of the mounted equipment and quickly changing it during the streaming. You can fully rotate the whole structure or the camera itself. You can also tilt the camera using the mounting connector or adjust the position of the spline joint with 15° increments. 
• The assembly can be installed in any BORIKA FASTen® mounting system or mount, and using conversion adapters — in the mounting systems from other brands ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, etc.).

Materials: fiberglass-reinforced polyamide, anodized aluminium with powder coating, A2 (AISI 304) stainless steel, brass.

In the package: an Ng400 action camera holder.

Tips on using & installation:

• The assembly can be supplemented with a SBa038 adapter, which has a ball-and-socket joint and allows the fixed accessory to be moved 360° over the 1.5″ (38 mm) ball and fixed at the selected position.
• To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water. 

Technical Details:

Designed for mounting an action camera at a distance of 400 mm from the place of installation on the vessel. The assembly includes an Ng002 swivel-tilt camera holder and an Ex400 extender. The design of the holder consists of a bracket with a 1/4” screw thread, a 2-to-3 GoPro mounting connector with an M5*30 DIN 931 bolt, an M5 DIN 934 nut with a square knob, attached to the holder with an M6*25 DIN 963 screw and an M6 DIN 985 nut, a tube (Ø 22, L — 270 mm), two 15° splines tilt joints, connected with two M6*25 DIN 931 screws and M6 DIN 934 nuts, as well as a male adapter shaped as a 12 pointed star. The assembly also includes an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The tilt position of the joints is fixed with two square knobs. The main parts are made of fiberglass-reinforced polyamide. The tube is made of an anodized aluminum with a powder coating. Fasteners — of A2 (AISI 304) stainless steel (except for two M6 DIN 934 brass nuts).