Βάση Στήριξης για Ράγα (τοποθέτηση στο πλάι) FASTen FS223

Product description:

The Fs223 T-Track adapter with side T-bolt is a more compact, lightweight version of the FMa mounting system. It can be mounted on the upward directed T-Tracks as well as T-Tracks directed to the inner space of the vessel. The mount is easy to move along the track, and by screwing the T-bolt and the knob nut it can be fixed in any selected place.
Fs223 mount is designed for light and medium loads and is compatible with all BORIKA FASTen® accessories: a spinning rod holder, an action camera monopod, a fish finder plate, a drink holder, a table and much more. Provided that BORIKA FASTen® conversion adapters are used, accessories and devices from other brands ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, carp fishing tackles, etc.) can also be fixed into the mount.
By loosening a knob nut the spline joint of the mount can be tilted in the required position.
Fixing of the accessory is carried out on the ROLL & LOCK principle: the mount body turns counterclockwise, which moves the locking mechanism to the open position, then the adapter is pushed into the mount all the way in and the mount turns clockwise, clamping teeth of the accessory adapter.

Materials: fiberglass-reinforced polyamide, A2 (AISI 304) stainless steel, brass.

In the package: an Fs223 mount.

Tips on using & installation:

This T-Track adapter is good for mounting accessories on a track directed towards the inner space of the boat. However, depending on what accessories you are planning to fix in it, it can also be installed on the directed upwards track of fishing kayaks. The accessory fixed in this way will be located overboard or inside the boat space, which could be relevant, for example, for mounting a fish finder transducer.
Disassembling the Fs223, you can use it to make structures with 27.7° splines extenders.
The Fs223 mounts can be installed at the end plugs of the Gm350, GRp500 and GRp700 BORIKA FASTen® round rails, which have a T-shaped slot.
There is no need to use any additional tools (a hex wrench, fasteners, adhesive, etc.) during the installation process. Installation is quick, and the mount can be used as intended immediately.

However, when mounting the Fs223 on a T-Track, it’s better to avoid high dynamic loads: it is important to keep in mind that the reliability of the structure depends not only on the strength of the mount, but also on the strength of the track.
To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.