Βάση Compact για (Ραγα) FASTen Fs218

Fs218 – Track adapter mount with bottom T-Bolt

Product description:

• The Fs218 mount with the bottom T-bolt is a more compact, lightweight alternative to the FFr222 mounting system. It can be installed on the upward directed T-Tracks without any additional mounting pads, is easy to move along the track, and is fixed in the selected place by screwing the T-bolt and the knob nut.
• Fs218 mount is designed for light and medium loads and is compatible with all BORIKA FASTen® accessories: a spinning rod holder, an action camera monopod, a fish finder plate, a drink holder, a table and much more. Provided that BORIKA FASTen® conversion adapters are used, accessories and devices from other brands ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, carp fishing tackles, etc.) can also be fixed into the mount.
• Fixing of the accessory is carried out on the ROLL & LOCK principle: the mount body turns counterclockwise, which moves the locking mechanism to the open position, then the adapter is pushed into the mount all the way in and the mount turns clockwise, clamping teeth of the accessory adapter.
• The mount comes with a polyurethane gasket to ensure a tight fit in the T-Tracks, which are larger than the guide lugs on the bottom of the mount. The gasket ensures that the mount cannot rotate in the T-Track, it comes with the assembly and is used if needed, at the user’s discretion.
• A D-ring is provided on the body of the mount, which allows you to fix the retriever’s carabiner of an accessory or equipment fixed in the mount, thereby protecting it from loss.

Materials: fiberglass-reinforced polyamide, polyurethane gasket, A2 (AISI 304) stainless steel.

In the package: an Fs218 mount.

Tips on using & installation:

• There is no need to use any additional tools (a hex wrench, fasteners, adhesive, etc.) during the installation process. Installation is quick, and the mount can be used as intended immediately.
• An important advantage of this compact mount is that it can be installed not only on T-Tracks. With the pads of Mb218, TRk150 and TRk255 models it can be installed on a hard surfaces of a vessel (deck or side), with Mp218 and Mp219 pads — on the surface of PVC inflatables, and with Ms220 pad equipped with 3M VHB tape — on hard, flat and smooth surfaces. This allows Fs218 to be used when equipping almost any vessel.

• Under the mount of this model it is possible to attach an additional PVC gasket (Pm218 model), that can be used for hanging of PVC MOLLE pouches for tackles and tools.
• However, when mounting the Fs218 on a T-Track, it’s better to avoid high dynamic loads (mounting of anchor systems paired with the anchor weight up to 20 kg, ladders, etc.): it is important to keep in mind that the reliability of the structure depends not only on the strength of the mount, but also on the strength of the track.
• To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.

https://www.youtube.com/watch?v=jL3BNkv4dng